8A 63V Cycle Satiator Charger ebike charger Electrified
8A 63V Cycle Satiator Charger ebike charger Electrified
8A 63V Cycle Satiator Charger ebike charger Electrified
8A 63V Cycle Satiator Charger ebike charger Electrified
8A 63V Cycle Satiator Charger ebike charger Electrified

8A 63V Cycle Satiator Charger

Regular price $690.00 Sale price$550.00
/
Tax included. Shipping calculated at checkout.
  • Lightening Fast Shipping
  • Low stock - 3 items left
  • Inventory on the way

The Cycle Satiator is a universal charger for all types of ebike batteries. You can program up to 20 custom charge profiles for any lead, nickel, or lithium battery pack with a full charge voltage of 63V or less. With 360 watts of charging power, it is over twice as fast as your normal 4 amp "Fast Charger", and yet it fits in a smaller package.

 

It's just not limited to charging a specific battery type. Instead, this one charger model can be configured for virtually any lithium, nickel metal hydride, or lead acid battery pack.

 

Informative Display

A large and bright OLED display screen shows all your realtime charging statistics; you can see the total amp-hours and voltage along with a clear graphic indicating the approximate charge in the pack.

 

 

 

Impressive Power Density

At almost 0.5 watts / cm3, the Cycle Satiator packs 2-3 times more power per volume than most other chargers available.  This translates into big league charging currents in a portable size device.

 

 

 

 

Fan Free Efficiency

The power electronics were carefully designed to reach 95% efficiency at full load, eliminating the need for a fan to get rid of waste heat and keep things cool. no more buzzing fan noise and no risk of charger meltdowns if the fan fails.

 

 

 

 

Sealed and Watertight

A gasketted enclosure and connector design strategy keeps the charger electronics protected in the face of rain, road spray, dust storms etc.

 

 

 

 

Compact and Narrow Size

The charger is less than 5cm high and 8cm wide, allowing it to fit easily in a saddle bag, under the rear rack, inside a frame triangle, or screwed to a chassis.

 

 

Power Factor Corrected

AC input runs from 100-240v, allowing for worldwide operation without any voltage selection switch, and features a 0.99 power factor which will please your utility grid too.

 

Benefits

Onboard Installation

The rugged, compact, and fan-free design allows the charger to be permanently mounted on the vehicle without risk of premature failure from vibration or exposure.

Seriously Fast Charging

With a 360-watt power output, the satiator can charge your batteries in half the time of typical 4amp ‘fast’ chargers.  It delivers up to 8 amps with 24 and 36v packs, and 7 amps with 48v packs.

 

 

 

One Charger For All

No need for a different charger for each battery type, the satiator can be programmed to work correctly with almost any packs on hand. select from one of our common preloaded profiles or make your own custom charge profiles.

Quick Select

Have anywhere from one to dozens of preconfigured charging profiles active, enabling you to readily switch between output modes with just a quick button press.

 

Satiate for Enhanced Cycle Life

Most lithium batteries are capable of vastly improved cycle life if they are not fully charged to saturation all the time, but at the expense of reduced range.

With the cycle satiator, you can program your primary profile to give an 80% charge, and have a secondary profile that does a 100% charge when you need full range. Then have the best of both worlds, a battery that lasts thousands of cycles but still goes the distance when you need it. For more details, read here.

Future Proof

The firmware can be upgraded in the field, and along with the flexible custom profiles this means your cycle satiator is ready for whatever batteries the future has in store.

 

 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.