Cyclone 3000W Mid Drive Conversion Kit: Installation Manual for Easy Setup and Performance Boost.

Cyclone 3000W Mid Drive Conversion Kit: Installation Manual for Easy Setup and Performance Boost.

Cyclone 3000W Mid Drive Conversion Kit Installation Manual

CYCLONE 3000W Mid Drive e bike conversion kit Installation – the ultimate solution for upgrading your electric bicycle to a robust mid drive system.

This comprehensive kit equips your bike for versatile use on both paved roads and off-road trails, transforming it from a hub motor to a high-performance mid drive setup.

With an impressive torque output of up to 3000 watts, experience the power and reliability you need for an exhilarating ride. Upgrade your electric bike today with the CYCLONE-TW 3000W Mid Drive Conversion Kit!

A. Purpose of the Installation Manual

Welcome to the comprehensive installation manual for the CYCLONE-TW 3000W Mid Drive Conversion Kit! This guide is specifically designed to help you seamlessly install this highly efficient kit onto your electric bike.

With detailed, step-by-step instructions, you'll be guided through each phase of the process, from precise part assembly to flawless wire connections, and secure mounting onto your bike's frame.

Additionally, this manual provides valuable troubleshooting tips to ensure you're well-prepared for any potential challenges during installation.

Rest assured, this detailed guide empowers you to effortlessly transform your electric bike into a high-performance marvel. Get ready to enhance your ride!

B. Overview of the Cyclone-TW 3000W Mid Drive Conversion Kit

The CYCLONE-TW 3000W Mid Drive Conversion Kit consists of four key components: the motor, the controller, the display screen, and the battery.

Designed for durability, the electric motor delivers an efficient continuous output of up to 3000 watts (with a peak power of 4000 watts) and features a sturdy aluminum shell.

The waterproof controller incorporates power-saving capabilities and adjustable speed settings. With the display screen, you can easily monitor important metrics such as speed and battery level during your rides.

This comprehensive mid-drive system provides ample power for even the most challenging cycling adventures.

Upgrade your bike with the CYCLONE-TW 3000W Mid Drive Conversion Kit for an enhanced riding experience.

C. Benefits of the Cyclone-TW 3000W Mid Drive Conversion Kit

The CYCLONE-TW 3000W Mid Drive Conversion Kit offers a number of benefits for riders. First, it provides higher torque and greater acceleration than a standard hub motor system.

This makes it easier to navigate hills and uneven terrain. Additionally, the mid drive design helps to reduce strain on your bike’s frame by distributing weight more evenly throughout the entire bicycle.

Finally, the kit features a long-lasting battery that can take you up to 50 miles on a single charge.

In addition to these performance benefits, the CYCLONE-TW 3000W Mid Drive Conversion Kit is also designed for convenience.

The controller comes with adjustable speed settings and other customizable features so that you can tailor your ride experience to suit your needs.

The display screen also makes it easy to monitor your speed and battery level as you ride.

This allows you to optimize your performance and ensure that you get the most out of the kit.

By taking advantage of the CYCLONE-TW 3000W Mid Drive Conversion Kit, riders can enjoy a more efficient and powerful ride experience.

With its durable components and adjustable settings, the kit is perfect for any terrain and any rider.

Whether you’re an experienced cyclist or a first-time eBiker, the CYCLONE-TW 3000W Mid Drive Conversion Kit has something to offer everyone.

Finally, the CYCLONE-TW 3000W Mid Drive Conversion Kit also offers excellent value for money.

The long-lasting battery and durable components ensure that you won’t have to worry about costly replacements or frequent repairs.

This makes it an ideal choice for anyone looking for a reliable and affordable eBike conversion kit.

With its powerful performance, customizable features, and excellent value, the CYCLONE-TW 3000W Mid Drive Conversion Kit is the perfect solution for anyone looking to make the switch to eBikes.

So if you’re ready to take your ride experience to the next level, then be sure to check out the CYCLONE-TW 3000W Mid Drive Conversion Kit today!

II. Pre-Installation Preparation

An assembled cyclone 3000w mid drive motor ready for installation

Before you begin using your new CYCLONE-TW 3000W Mid Drive Conversion Kit, there are a few important precautions and preparations that must be taken.

First of all, it is important to read through the user manual and familiarize yourself with both the specifications and safety instructions for the kit. Additionally, make sure to install any necessary tools or equipment before beginning the conversion process.

It is also essential to research your local laws and regulations regarding eBikes prior to beginning the installation.

Knowing what type of battery, motor, lights, brakes and other components are allowed in your area will help you make informed decisions about which parts to use when assembling your new eBike.

By following these simple steps,

A. Required Tools and Equipment

you can ensure that you have the right tools and equipment to properly install your CYCLONE-TW 3000W Mid Drive Conversion Kit. Some of the common items needed include:

  • Standard bike tools, such as a set of Allen wrenches, screwdrivers, etc.
  • Torque wrench (or torque key) for tightening bolts.
  • Wheel bracket for mounting electric motor.
  • Brake levers and cables.
  • Throttle or pedal-assist sensor.
  • Battery charger and meter (if applicable).

Once you have all of the necessary tools and equipment on hand, you are ready to begin the conversion process!

B. Ensure Compatibility with your Electric Bike

Before you begin installing the CYCLONE-TW 3000W Mid Drive Conversion Kit, it is essential to confirm its compatibility with your electric bike.

To ensure a seamless and successful conversion, ensure that the kit's battery, motor, brakes, and other components are designed to integrate and function optimally with your existing eBike model.

Taking the time to double-check these compatibility factors will help guarantee a smooth and efficient conversion experience.


Get ready to transform your electric bike with the CYCLONE-TW 3000W Mid Drive Conversion Kit!

C. Safety Precautions

Before beginning the installation process of your CYCLONE-TW 3000W Mid Drive Conversion Kit on your eBike, it's crucial to prioritize safety and take the necessary precautions.

Your well-being is paramount, so wearing protective gloves and eyewear is recommended to shield yourself from potential injuries while working with the electric bike components.

Additionally, thoroughly read and understand the provided instructions in the kit to empower yourself with the knowledge needed for a successful installation.

These extra measures will enhance your safety and the overall effectiveness of the conversion kit. Get ready to transform your eBike with the CYCLONE-TW 3000W Mid Drive Conversion Kit!

III. Step-by-Step Installation Guide

A. Remove Existing Components

For a smooth installation of your new CYCLONE-TW 3000W Mid Drive Conversion Kit, it's crucial to remove necessary components from your eBike.

This includes detaching pedals, removing the bottom bracket, and potentially disassembling the crankset based on your bike's configuration.

By carefully following these steps, you can ensure a seamless installation experience.

Remember to store these components in a safe and easily accessible place for future modifications or repairs.

With the CYCLONE-TW 3000W Mid Drive Conversion Kit, you can embark on an exciting eBike conversion journey, enjoying the benefits and enhanced performance it brings to your eBike!

B. Install the Cyclone-TW 3000W Mid Drive Conversion Kit

Now, you're prepared to install the new CYCLONE-TW 3000W Mid Drive motor for eBikes.

Begin by splitting your new bottom bracket and sliding it through the drive side of the motor and the bike's bottom bracket, keeping in mind the opposite thread.

Ensure a snug fit into the bottom bracket shell of your bike frame, positioning it carefully for centered alignment with the chainring and rear cassette.

drive side of the cyclone ebike motor with spindle inserted and hand tight electrified

Tighten the drive side bottom bracket securely against the frame.

cyclone 3000w mid drive motor pull up to the frame then tightened

On the non-drive side, secure the motor by adjusting the offset bracket to achieve a proper fit.

non drive side cyclone 3000w motor with support bracket - Electrified


Use screws and bolts, tightening them evenly for stability. Follow the torque specifications in your instruction manual to avoid over-tightening and potential damage.


Remember, a correctly mounted motor ensures efficiency, a smoother ride, and prolongs the lifespan of your eBike. Get ready to embark on new adventures with confidence and explore with ease.

C. Connect the Kit to the Electric Bike

Once you have successfully installed the conversion kit, the next crucial step is to establish a secure connection between the kit and your bike's existing electrical system.

Start by carefully selecting the recommended cables and connectors provided by the manufacturer.

Attach the motor's power cable firmly to the battery's output port for a reliable power supply. Double-check all connections to ensure they are secure.

Next, proceed to connect the motor controller to both the motor and the battery.

Pay close attention to detail and align the connectors correctly for seamless communication between the components.

Follow the diagrams and instructions provided by the manufacturer diligently.


Throughout the process, it is essential to handle the components with care to avoid any potential damage to your bike's delicate electrical system.

Be cautious and avoid applying excessive force during the connection process.

By following these steps and heeding the manufacturer's instructions, you can confidently proceed with the conversion, knowing that your bike's electrical integrity is protected.

D. Test the Kit's Performance

Once everything is properly installed and connected, it's time to put the kit's performance to the test.

Start by turning on the battery and using the throttle or pedal-assist sensor to engage the motor. If all the connections are correct, you should experience a smooth and efficient movement of the bike.

Take a moment to appreciate the effortless power and enhanced riding experience that the conversion brings.

However, if you encounter any issues during the test, don't panic.

Simply revisit the installation instructions and carefully double-check all your connections.

Sometimes, a small adjustment or a minor oversight can make a big difference. Remember, the success of your conversion ultimately depends on the meticulousness of your installation and the thoroughness of your testing.

So, take your time, follow the instructions diligently, and enjoy the process of transforming your bike into a powerful and efficient machine.

Happy riding!


IV. Troubleshooting and Maintenance

A. Common Issues During Installation

During the installation process, there are several common issues that users might encounter. One such issue is difficulty in fitting the motor into the bicycle frame.

This can happen if the motor size is not compatible with the frame dimensions or if the mounting brackets are not properly aligned.

Another potential issue is connections failing to establish, which can be caused by loose or improperly connected wires.

Additionally, the controller not responding could be due to incorrect programming or a faulty controller unit.

These issues often arise from overlooking the manufacturer's instructions or using incompatible parts. T

o overcome these challenges, it is crucial to carefully revisit the installation guidelines, ensuring proper alignment, secure connections, and correct programming.

By taking these measures, users can effectively circumvent these problems and ensure a smooth and successful installation experience.

B. Troubleshooting Guide

To ensure a smooth and hassle-free experience with your electric bike, it is crucial to prioritize a few key steps.

First and foremost, make sure all connections are securely in place and that your battery is fully charged.

In case the motor does not respond, it is highly recommended to inspect both the wiring and the controller.

For effective troubleshooting, using a multimeter can be invaluable in assessing component functionality and identifying any potential issues.

If you encounter more specific problems, refer to the troubleshooting section in the manufacturer's manual, which provides tailored solutions designed specifically for your electric bike. Stay proactive and enjoy the benefits of a trouble-free ride!

C. Maintenance Tips and Best Practices

To ensure optimal and long-lasting performance of your electric bike, regular maintenance is crucial.

By keeping the electrical components clean and dry, checking for loose connections, and recharging the battery after extended use, you can maximize efficiency.

It's also advisable to periodically inspect the motor and controller for signs of wear and tear that may require attention.

Remember, taking care of your electric bike is just as important as enjoying the enhanced riding experience it offers.

These maintenance practices will help you enjoy the benefits of your electric bike for years to come.

V. Conclusion

By following the guidelines outlined in this document, you can ensure a seamless and enjoyable electric bike installation experience.

With careful troubleshooting steps and maintenance tips at your disposal, you can take full advantage of your new ride.

Whether you’re looking for an exciting and thrilling adventure or a leisurely cruise around town, an electric bike provides the perfect opportunity to explore your surroundings in style with minimal effort. So, go ahead and start your journey – you'll be glad you did.

Don't forget to check out local bike shops or online retailers for the latest electric bike accessories as well.

There are a variety of options available to meet your needs, from battery chargers and upgraded motors to improved suspension systems and cargo racks.

With the right accessories in place, you can optimize your electric bike for even more enjoyable and convenient riding experiences.

Make sure to do your research and get the best quality items to ensure reliable performance and maximum satisfaction from your electric bike.

Enjoy the ride!

A. Benefits of the Cyclone-TW 3000W Mid Drive Conversion Kit Revisited

The Cyclone-TW 3000W Mid Drive Conversion Kit offers a range of benefits to electric bike riders, from smooth and powerful rides to cost savings and easy installation.

The kit comes with everything you need to turn your regular bicycle into an electric one in no time – all you have to do is follow the included instructions!

Plus, with its robust motor, torque sensing technology, and durable construction, the Cyclone-TW can tackle any terrain with ease.

And thanks to its efficient design, you'll be able to enjoy more riding time and spend less money on energy costs.

Altogether, the Cyclone-TW 3000W Mid Drive Conversion Kit is a great choice for those looking to upgrade their ride to an electric one!

B. Final Thoughts and Recommendations

When it comes to choosing the right electric bike conversion kit, the Cyclone-TW 3000W Mid Drive Conversion Kit is an excellent choice.

Its powerful motor and torque sensing technology provide a smooth ride with plenty of power for tackling any terrain.

Plus, its easy installation and cost savings make it a great value for money option.

So if you're looking to upgrade your regular bike to an electric one with minimal effort, the Cyclone-TW 3000W Mid Drive Conversion Kit is a great choice.

However, it's also important to remember that proper maintenance and supportive accessories are essential for optimal performance and safety of your electric bike.

Regularly check your battery levels, ensure all wires and connections are secure and in good condition, replace worn out tires, and don't forget to wear a helmet and other protective gear while riding!

With these final tips in mind, you can feel confident that your electric bike conversion kit will serve you reliably for years to come.

 VI. Appendices

A. Cyclone-TW 3000W Mid Drive Conversion Kit Components:

  • 36V/48V 3000W Mid Drive Motor with Torque Sensor
  • LCD Display
  • Throttle Grip and Thumb Tool
  • Wiring Harness
  • Speed Sensor
  • Chainring Adaptor
  • Mechanical Brake Lever Set (optional)

B. Technical Specifications:

  • Rated Power: 3000W
  • Peak Power: 6000W
  • Rated Voltage: 36V/48V
  • Rated Current: 40A
  • Speed Sensor Range: 0.8-4.2m/s (1.7 to 8.5mph)
  • Maximum Torque Output: 160Nm

C. Frequently Asked Questions (FAQs)

Q: Does the Cyclone-TW 3000W Mid Drive Conversion Kit come with a warranty?

A: Yes, all our products come with a 12-month warranty.

Q: Can I install this conversion kit on my existing bike?

A: Yes, the kit can be installed on any regular bike frame as long as it is compatible with the included components.

Q: How long will the battery last?

A: Battery life depends on factors such as how often you ride and how much power you use. On average, a 36V/48V 10Ah battery should last for about 20 to 25 miles of riding. With proper maintenance and care, it can last even longer.

Q: What safety measures should I take when riding an electric bike?

A: As with any motor vehicle, always follow the rules of the road and wear a helmet and other protective gear while riding your electric bike. Additionally, it is important to check your battery levels regularly and ensure that all wires and connections are secure and in good condition.

Q: What is the top speed of this conversion kit?

A: The maximum speed capacity of the Cyclone-TW 3000W Mid Drive Conversion Kit is 900 rpm depending on gear ratios, the rider and conditions it could see speeds over 60km/hr which is not recommended on a pushbike. This can be adjusted by using a compatible controller. However, please note that the actual speed experienced may vary according to your riding conditions and terrain.

Q: Are there any additional components that I need to buy in order to install the conversion kit?

A: Yes, depending on the bike setup and requirements, additional components may be necessary. For example, a compatible controller or throttle will be needed for controlling the motor's speed and torque output. Please consult our installation manual for a full list of components needed.

VII. Glossary

A. Definitions of Technical Terms Used in the Installation Manual.

  • Controller: A component that is responsible for controlling the motor's speed and torque output.
  • Throttle: An input device which allows the user to control the power of an electric bike.
  • Voltage (V): The measurement unit for electric potential difference between two points in a circuit.
  • Ampere (A): The measurement unit for the rate of electric current flow in a circuit.
  • Watt (W): The measurement unit for electrical power, calculated as voltage multiplied by current.
  • Nm: Unit of torque equal to one Newton metre. It is used to measure rotational force generated by an electric motor.
  • Torque: The rotational force generated by an electric motor. It is measured in Nm (Newton metres).
  • Mid Drive: A type of motor configuration whereby the motor is located in the middle of the bike frame, near the bottom bracket and between both wheels. This allows for better weight distribution and improved overall riding performance.


  1. Introduction
  2. Installation Instructions
  3. Troubleshooting Tips
  4. Safety Considerations
  5. FAQs
  6. Warranty Information
  7. Glossary of Technical Terms Used in the Installation Manual

By following this guide, you will have everything you need to know to successfully install your electric bike conversion kit.

With the correct tools and components, you can look forward to improved riding performance and a reliable electric bike experience for years to come.

If you have any further questions or concerns regarding our products or installation process, please do not hesitate to contact us.

Our customer service team is available 24/7 to assist you with anything you may need.

We look forward to hearing from you!

Thank you for choosing us!

Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.